Lighting function
Open the total power switch, if LED in yellow which indicate the battery capacity in good status, open the lighingt switch, the lighting lamp stat working; If LED turn red , the battery is in low voltage status, please charge immediately.
Output by AC function
Open the total power switch and AC switch in tandem, green LED lights, voltmeter indicate the current-voltage AC voltage. When not use AC, please turn AC switch off to save battery power.
Charge function
the power system has two ways of charge battery: solar panels and AC adapter
Charge Notices
AC adapter charge : While AC power is available, please charge battery with AC Adapter.
Non-matching adapter shall not be used, Otherwise, the battery will damaged.
solar charge
Place solar panel outdoors and remove all covering on surface of solar panels, make sure solar panels face sun in south direction to absorb sunlight fully,. then plug the power line of the solar panels into " Solar charging& charging adapter " socket.The adopted solar panels with peak power range : 10W-80W. ( Monocrystalline or Polysilicon solar panels), and fully charge time vary with different solar panels.
If you want to increase the capacity of batteries, you can externally connect battery with supporting power line. The red line connect with positive pole of battery and the back line connect with negative pole of battery. If the car battery in low-voltage, you can connect with power station and activate motor.
|